***THIS PART IS VERY TINY AND HAS SHARP POINTS. PLEASE BE CAREFUL TO NOT LEAVE IT WITHIN THE REACH OF CHILDREN OR PETS AS THEY CAN BE HARMFUL IF PLAYED WITH****.
This tiny power connector with four pins is required to relay power from the power cord to your 120V RGB LED tape light strips.
Each side of the pins is different. To install the power connector, the sharp ends must be stabbed and pushed into the tape light conductors at an end of the tape light and the blunt sides are to be connected to the power cord.
You can add some clear silicone or use a heat shrink sleeve to protect from moisture or insects.